PitBull Unit Frames 4.0

Woof. Arf. Yip.

Getting Started:

You can help translate PitBull for your language with the localization tool.

Classic

PitBull works with WoW Classic! Classic Era/Vanilla is supported in v4.3.x-vanilla releases. Cataclysm Classic is supported in v4.2.x releases (the same releases retail use).

Classic Era caveats:

Aura duration is not available from the API, so PitBull uses LibClassicDurations to show them. The duration can be inaccurate if it's affected by rank or talents.
Cast info is only available for your spells from the API. PitBull uses LibClassicCasterino to show cast bars for other units, but this can be inaccurate since there is a lot of guess-work involved.

Download

CurseForge: https://www.curseforge.com/wow/addons/pitbull-unit-frames-4-0

Wago: https://addons.wago.io/addons/pitbull4

WoWInterface: https://www.wowinterface.com/downloads/info20021

GitHub: https://github.com/nebularg/PitBull4/releases

Comments

_ForgeUser2794128
- Join Date: 9/15/2019
- Posts: 0
- Member Details
#921 _ForgeUser2794128

View User Profile

Send Message

Posted Jul 29, 2009
How do you get the text to show your own health % or text in the health bar?

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#938 shefkin

View User Profile

Send Message

Posted Aug 1, 2009
Go to your layout, Texts, Health or Lua:Health as the case may be and choose the Health: Absolute and Percent instead of Health: Smart that you probably have.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#937 shefkin

View User Profile

Send Message

Posted Aug 1, 2009
At current PB4 treats a raid with only members in group 1 as a party. There is an enhancement ticket to change this. It's actually the intended behavior at current though. Sounds like it explains your problem though.

Rollback Post to Revision RollBack
_ForgeUser2400934
- Join Date: 10/7/2019
- Posts: 0
- Member Details
#920 _ForgeUser2400934

View User Profile

Send Message

Posted Jul 29, 2009
Two things:
First -
I was having the issue where the Blizz party frames kept showing up even though I had "Hide Blizz Party Frames" checked in the PB3 and PB4 config. I disabled everything except PB4 and frames worked as expected, so I started turning mods on one-by-one that dealt in some way with unit frames. My culprit was IceHUD - the curse client had not updated it even though there was a recent release. Updated IceHUD and everything works fine now.

Second -
I figured out how to set up different groups and then link whatever unit I wanted to that group. The problem I'm having is that frames aren't showing up when they're supposed to show up, or disappearing when they're supposed to disappear. I use party frames while in 5-mans, but Grid in raid (so I don't use raid frames). However, in raid the party frames are still visible even though I selected to only show when in party. Additionally, I use MT windows and MT Target windows when in raid, so after setting those up in what I thought was the correct manner (create MT group, add raid units, filter by MT, then show in 10, 25, 40 man raids) my MT or MT Target frames are not showing up when in a raid group.

Any help would be greatly appreciated.

Rollback Post to Revision RollBack
_ForgeUser275831
- Join Date: 6/13/2007
- Posts: 1
- Member Details
#919 _ForgeUser275831

View User Profile

Send Message

Posted Jul 29, 2009
Request: I want to apply one color to all bars. Could you possibly implement perhaps an "apply to all" option or atleast an an option in the color picker to copy and paste to others coz what i'm trying to do is have all my health bars class color coded on each of my chars.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#936 shefkin

View User Profile

Send Message

Posted Aug 1, 2009
This should help you:
http://wow.curse.com/downloads/wow-addons/details/enhanced-colour-picker.aspx

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#934 shefkin

View User Profile

Send Message

Posted Aug 1, 2009
Nope. Feel free to open an enhancement ticket asking for this. But it's not going to be a high priority.

Rollback Post to Revision RollBack
_ForgeUser1420379
- Join Date: 7/19/2019
- Posts: 0
- Member Details
#918 _ForgeUser1420379

View User Profile

Send Message

Posted Jul 29, 2009
Is it possible to make layouts differentiate between Friendly and Hostile targets?

I would like to create seperate layouts for when I'm targetting either one. Is this possible?

Rollback Post to Revision RollBack
Raynesis
- Join Date: 9/30/2008
- Posts: 2
- Member Details
#917 Raynesis

View User Profile

Send Message

Posted Jul 29, 2009
Hello,

I too, am impressed with the configuration after switching over from PB3 2 days ago. However I am having problems with VisualHeals not working properly.

It gives an extra white bar randomly, and the incoming heals don't work correctly. They are currently showing outside of the bar, instead of where the current health is. (I suck at explaining)

I have seen one ticket with the same problem but it seems like you cannot replicate this error? I hope somehow you can fix this soon because it is really important for a healer.

Thanks! :)

Rollback Post to Revision RollBack
_ForgeUser2922215
- Join Date: 10/7/2019
- Posts: 0
- Member Details
#910 _ForgeUser2922215

View User Profile

Send Message

Posted Jul 27, 2009
Why is the license switching from an open source license to a closed source one? Just to deal with wowmatrix? Isn't this inviting a copyright problem since you had "access" (used in the legal sense) to the original code. There are better ways of dealing with the wowmatrix's or wowmatrices of the world than trying to mess with the license. Especially since the authors now could potentially put themselves at risk for federal copyright violations and those can cost one far more than the bandwidth wowmatrix used up. Nothing like having to deal with a $150,000 personal fine even though you have to make the addon freely available. Also, a violation will totally invalidate the rather thin copyright that could potentially be claimed anyways.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#911 shefkin

View User Profile

Send Message

Posted Jul 28, 2009
I honestly don't think you know what you are talking about. The copyright holder is not bound by their own license. I can put something out under an open source license and then license it to someone else under entirely different terms. Any code that has been borrowed in PB4 from PB3 is copyrighted by the people doing the borrowing. So unless we are going to sue ourselves it's not an issue.

We've gone to All Rights Reserved because we want the ability to ask people not to distribute the addon if they're doing something we don't like. With an open source license we can't stop someone from distributing the addon, even if they're bundling it with a keylogger.

All that's really changed is that people who wish to redistribute PitBull4 should ask for permission to do so.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#912 shefkin

View User Profile

Send Message

Posted Jul 28, 2009
It's entirely possible that some other addon is showing the party frames. If you're having problems with this try reproducing the problem with PitBull as the only addon loaded. If you can do so I'd be interested in your configuration file.

Rollback Post to Revision RollBack
_ForgeUser3211
- Join Date: 2/16/2005
- Posts: 0
- Member Details
#913 _ForgeUser3211

View User Profile

Send Message

Posted Jul 28, 2009
Shekfi, Thanks for the response. I am, in fact, using the alpha (you guys' alphas are better than most release versions). I'll try what you suggested shortly.

Rollback Post to Revision RollBack
_ForgeUser3211
- Join Date: 2/16/2005
- Posts: 0
- Member Details
#906 _ForgeUser3211

View User Profile

Send Message

Posted Jul 27, 2009
At some point with the updates over the past couple of days, PBUF no longer "hides" the default Blizzard group frames when I am in a group. So now I have the PBUF frames and the default frames overlapping....

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#908 shefkin

View User Profile

Send Message

Posted Jul 27, 2009
jdhas, Based on what you're saying I'm guessing you're using the Alpha. There was a bug that actually made the Hide Blizzard module continue to hide stuff even when it was disabled. It actually defaulted to hiding stuff when it was disabled.

So go to Hide Blizzard, check Enable, Check Party or any other Blizzard frames you want hidden.

Rollback Post to Revision RollBack
_ForgeUser720531
- Join Date: 4/17/2008
- Posts: 0
- Member Details
#909 _ForgeUser720531

View User Profile

Send Message

Posted Jul 27, 2009
I'm still using the Pitbull 3.0 but what you said does not work because for some reason it just keeps reverting back to not hiding the party frame no matter how many times you go back and check that box. It's hiding all the other blizzard frames but keeps showing the party one.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#907 shefkin

View User Profile

Send Message

Posted Jul 27, 2009
Use the layout editor. Make a new layout. Then go to the unit or group configuration and change to that layout.

Rollback Post to Revision RollBack
_ForgeUser1690494
- Join Date: 10/4/2019
- Posts: 0
- Member Details
#914 _ForgeUser1690494

View User Profile

Send Message

Posted Jul 28, 2009
Okay, I need help again!
if I for example create a new layout named PLAYER. Then I go to Units and select Player. Now I go back to layout editor - indicators - portrait and select portrait...
Nothing happens! Only if I choose the standard layout NORMAL it will be changed! for all unit frames!

Does it work or am I missing something?

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#915 shefkin

View User Profile

Send Message

Posted Jul 28, 2009
There's not one layout. You can make as many layouts as you want and apply them to as many or as few frames as you want.

So just make as many layouts as you need uniquely configured frames.

If you want to change something on all of them you'll have to change all of the layouts.

Rollback Post to Revision RollBack
_ForgeUser1690494
- Join Date: 10/4/2019
- Posts: 0
- Member Details
#905 _ForgeUser1690494

View User Profile

Send Message

Posted Jul 27, 2009
Okay... One MAJOR problem about this! Maybe its just me who's a nuub and cant figure it out or else it's just an pretty annoying thing with PB4 vs. PB3...

Every frames (Player, Target, Party, Pet etc.) are sharing the same, what can you say, "layout"...

Fx.: If you want to have the debuffs from your party to the right side of the unit-frame - the debuffs from ALL other unit-frames will be on the right side!!!!!!!!!!

In PB3 you could separately change each frame without affecting others! Is it just me who dunno how to do it or is it not been implemented yet?

Hope someone out there can help me!

Rollback Post to Revision RollBack
To post a comment, please login or register a new account.

Project ID

7522
Created

Aug 1, 2008
Last Released File

Jan 15, 2026
Total Downloads

5,532,098

ckknight Owner
nebula169 Author
shefkin Author
Stanzilla Ticket Manager

WowAce

PitBull Unit Frames 4.0

Addons

PitBull Unit Frames 4.0

Table of Contents

PitBull Unit Frames 4.0

Classic

Download

Comments

About This Project

Categories

Members

Recent Files

WoW Retail

WoW Mists of Pandaria Classic

WoW Classic