PitBull Unit Frames 4.0

Woof. Arf. Yip.

Getting Started:

You can help translate PitBull for your language with the localization tool.

Classic

PitBull works with WoW Classic! Classic Era/Vanilla is supported in v4.3.x-vanilla releases. Cataclysm Classic is supported in v4.2.x releases (the same releases retail use).

Classic Era caveats:

Aura duration is not available from the API, so PitBull uses LibClassicDurations to show them. The duration can be inaccurate if it's affected by rank or talents.
Cast info is only available for your spells from the API. PitBull uses LibClassicCasterino to show cast bars for other units, but this can be inaccurate since there is a lot of guess-work involved.

Download

CurseForge: https://www.curseforge.com/wow/addons/pitbull-unit-frames-4-0

Wago: https://addons.wago.io/addons/pitbull4

WoWInterface: https://www.wowinterface.com/downloads/info20021

GitHub: https://github.com/nebularg/PitBull4/releases

Comments

_ForgeUser4424920
- Join Date: 9/6/2020
- Posts: 0
- Member Details
#2416 _ForgeUser4424920

View User Profile

Send Message

Posted Jun 23, 2010
There is no longer the option for bar textures called "flat" :(. It was so clean and beautimous.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#2417 shefkin

View User Profile

Send Message

Posted Jun 23, 2010
Check the Load Out of Date Addons checkbox, SharedMedia doesn't usually get its Interface version updated.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#2420 shefkin

View User Profile

Send Message

Posted Jun 23, 2010
Not for NPCs. NPCs don't have a class really. They'll always be Paladin, Mage or Warrior. Even if they actually seem to be some other class. Makes the class coloring for NPCs not very useful.

Rollback Post to Revision RollBack
_ForgeUser1492935
- Join Date: 9/6/2020
- Posts: 0
- Member Details
#2415 _ForgeUser1492935

View User Profile

Send Message

Posted Jun 23, 2010
hi,

is there any way for me to have my enemy health bars showing as their respective class colour, instead of the hostile unit colour?

thx

Rollback Post to Revision RollBack
_ForgeUser2083528
- Join Date: 2/26/2009
- Posts: 0
- Member Details
#2414 _ForgeUser2083528

View User Profile

Send Message

Posted Jun 23, 2010
Ok I have recently updated Pitbull to the latest version. I have one problem, I am no longer able to see the boss frames for gunship and the blood council princes. I have looked all over for a fix. The only thing I was able to find was to install another frame addon. I used to have these framses showing and I really depend on them especially the blood council, when choosing the correct one to dps. How do I get these frames back. I do not see anything in the addon.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#2418 shefkin

View User Profile

Send Message

Posted Jun 23, 2010
PB4 doesn't support them, you have some other addon hiding Blizzard's frames.

Rollback Post to Revision RollBack
logicalfundy
- Join Date: 1/21/2008
- Posts: 3
- Member Details
#2429 logicalfundy

View User Profile

Send Message

Posted Jun 24, 2010
I don't have an account there. And I don't plan on making one just to create a ticket.

Rollback Post to Revision RollBack
logicalfundy
- Join Date: 1/21/2008
- Posts: 3
- Member Details
#2430 logicalfundy

View User Profile

Send Message

Posted Jun 24, 2010
Nvm, apparently it recognized my WoWInterface login.

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#2431 shefkin

View User Profile

Send Message

Posted Jun 24, 2010
Actually the wowace accounts are the same as curse here.

Rollback Post to Revision RollBack
logicalfundy
- Join Date: 1/21/2008
- Posts: 3
- Member Details
#2432 logicalfundy

View User Profile

Send Message

Posted Jun 24, 2010
ok. Well, it recognized the login from somewhere. So now there's a ticket :).

Rollback Post to Revision RollBack
logicalfundy
- Join Date: 1/21/2008
- Posts: 3
- Member Details
#2411 logicalfundy

View User Profile

Send Message

Posted Jun 22, 2010
Wanted:

-Option to crop the 2D portrait instead of having it squish to a weird aspect ratio when doing something like placing it as "center" with the rest of the bars.

Or

-Option to freeze the 3D portrait.

Tried to do something like Luis' setup from wow.com.

http://www.wow.com/2010/06/22/reader-ui-of-the-week-luis-ui/2#commentform

Rollback Post to Revision RollBack
_ForgeUser1073194
- Join Date: 8/25/2008
- Posts: 36
- Member Details
#2412 _ForgeUser1073194

View User Profile

Send Message

Posted Jun 22, 2010
You should probably make a ticket on wowace for additional features.

Rollback Post to Revision RollBack
enjoyrc
- Join Date: 12/29/2006
- Posts: 2
- Member Details
#2410 enjoyrc

View User Profile

Send Message

Posted Jun 22, 2010
Absolutely amazing!

Rollback Post to Revision RollBack
_ForgeUser4466368
- Join Date: 9/6/2020
- Posts: 0
- Member Details
#2409 _ForgeUser4466368

View User Profile

Send Message

Posted Jun 22, 2010
i have run into a problem with this addon

when i open a window (like character menu, quest log, ect...) it goes under these user frames. any way to stop this?

Rollback Post to Revision RollBack
shefkin
Curse Premium
- Location: North Bend
- Join Date: 2/28/2007
- Posts: 381
- Member Details
#2419 shefkin

View User Profile

Send Message

Posted Jun 23, 2010
You can edit the strata and frame level of the frames in the Layout editor under General Strata.

Rollback Post to Revision RollBack
_ForgeUser1073194
- Join Date: 8/25/2008
- Posts: 36
- Member Details
#2408 _ForgeUser1073194

View User Profile

Send Message

Posted Jun 22, 2010
Remember that you can make multiple raid groups! So if you want to make vastly different raid groups just make a new raid group and check which types of raids you want to see that group for.

You may want to review the guide on raid groups here:
http://www.wowace.com/addons/pitbull4/pages/guide/party-and-raid-frames/

The section on raids is towards the bottom.

Rollback Post to Revision RollBack
_ForgeUser1565643
- Join Date: 6/30/2019
- Posts: 0
- Member Details
#2403 _ForgeUser1565643

View User Profile

Send Message

Posted Jun 21, 2010
Ok, yet ANOTHER question. I want to create different layouts/groups depending on the size of the raid/bg. So, I want a 40 person raid layout for old world/AV/IoC. I want a 25 man layout for Raids, 15 man for AB, SoA, and a 10 man for WSG & Raids. Is there anyway to automate this switching between layouts/groups depending on what the instance is? Under unit group there is only "Raid". I can obviously create the Layouts themselves, but manually have to change the Group to that layout for the raid/instance type.

Rollback Post to Revision RollBack
_ForgeUser1565643
- Join Date: 6/30/2019
- Posts: 0
- Member Details
#2404 _ForgeUser1565643

View User Profile

Send Message

Posted Jun 21, 2010
Nevermind. I found it. Apparently if you click on ALL the tabs (say Filtering in particular) you will see what you are looking for.

Rollback Post to Revision RollBack
_ForgeUser1565643
- Join Date: 6/30/2019
- Posts: 0
- Member Details
#2405 _ForgeUser1565643

View User Profile

Send Message

Posted Jun 21, 2010
I should probably elaborate on this. I can create 3 columns, but I don't want the numbering to go like this:

1 2 3
4 5 6
7 8 9
10 11 12
13 14 15

I want it to do a full group in a column before going to the next column. It should increment in 5s. So it would look like this:

1 6 11
2 7 12
3 8 13
4 9 14
5 10 15

That is what I want. Each group in PB3 was a separate unit. I want to figure out a way to sort by group vertically then horizontally.

Rollback Post to Revision RollBack
_ForgeUser1565643
- Join Date: 6/30/2019
- Posts: 0
- Member Details
#2402 _ForgeUser1565643

View User Profile

Send Message

Posted Jun 21, 2010
I have been trying to configure PB4 so that it is similar to the way my PB3 setup is. I have run in to an issue when configuring raid groups. In PB3 I have it set to show 3 columns only before starting a new row (well, technically I just moved each group to be that way). I have not found a way to do that in PB4. Is that possible and if so, how do I do it? Thanks.

Picture for reference: http://i907.photobucket.com/albums/ac276/DanGilbertTX/PB3Raid.jpg

Rollback Post to Revision RollBack
To post a comment, please login or register a new account.