WowAce.com

AdiBags

216 - Outfitter sets not "sticking"

Can you reproduce this problem? What steps will reproduce it?
1. Set up some Outfitter sets and make sure the Outfitter filter has the appropriate priority (i.e. above everything but manual)
2. Open bank. No sets :(
3. fyi: changing the outfitter filter (while the bank is open) to a different priority (i tried 97%) will temporarily show the proper output, but closing/reopening the bank resets this to the above.

What is the expected output? See Outfitter sets as filters in the bank and bags

What do you see instead? The equipment filter (set to the default 60%) is superseding the Outfitter one (92%) in the bank. Personal bags are rendering the filter priorities properly.

What version of the addon are you using? The latest as of 11/1 @ 1:04am PST (after Daylight's Savings switch).

Do you have an error log of what happened? (Please enable the display of Lua errors or install an error-reporting addon to be sure whether an error happens or not.) No

Please provide any additional information below.

User When Change
karaste Nov 05, 2014 at 22:56 UTC Changed status from Waiting to Replied
Adirelle Nov 05, 2014 at 22:15 UTC Changed status from Fixed to Waiting
Adirelle Nov 05, 2014 at 22:15 UTC Changed status from New to Fixed
karaste Nov 02, 2014 at 09:05 UTC Create

You must login to post a comment. Don't have an account? Register to get one!

  • 5 comments
  • Avatar of karaste karaste Nov 05, 2014 at 23:55 UTC - 0 likes

    And I just noticed that I can also make the filter show in that bank after reopening it by switching to the reagent tab and the back to main bank. And again, this operates the same way on closing and reopening the bank. The set "disappears" again until one of the mentioned intervening actions.

  • Avatar of karaste karaste Nov 05, 2014 at 23:53 UTC - 0 likes

    Forgot to mention that Swatter showed no entries throughout all this.

  • Avatar of karaste karaste Nov 05, 2014 at 23:51 UTC - 0 likes

    1. I tested this with only AdiBags v1.7.9, AdiBags_Outfitter v1.3, Outfitter 5.10b6 and Swatter v4.4.2.
    2. I reset all addons to their original defaults, then verified that there were no manual filters in AdiBags.
    3. I made sure that the Outfitter filter was enabled.
    4. When I first deposit the outfit, it filters properly in the bank to "Set:Normal"
    5. I close the bank, and then reopen it, and "Set:Normal" is gone and all the items in that set are filtered to the default "Armor" filter.
    6. I re-equip the outfit, shut the bank and unequip outfit to inventory bags.
    7. The filter "Set: Normal" works and outfit shows in that section.
    8. I then started at #4 again, by opening my bank and moving the outfit into it via the right-click functionality on the section title in my bags.
    9. The same behavior repeated itself. Filter "Set:Normal" functions on first deposit, but closing and reopening the bank window makes it go away.

    10: I did notice while testing this that if I toggled the outfitter filter on and off, while the bank window was open, I could "force" the "Set:Normal" filter to appear in the bank....however, leaving it enabled and with the set showing didn't survive closing and reopening the bank.

    Mark me thoroughly puzzled.

  • Avatar of karaste karaste Nov 05, 2014 at 22:56 UTC - 0 likes

    I will retry today and see if it is still happening

  • Avatar of Adirelle Adirelle Nov 05, 2014 at 22:15 UTC - 0 likes

    Cannot reproduce this issue with Outfitter 5.10b6 and latest AdiBags.

  • 5 comments

Facts

Last updated
Nov 05, 2014
Reported
Nov 02, 2014
Status
Replied - Someone has replied after waiting for more information.
Type
Defect - A shortcoming, fault, or imperfection
Priority
Medium - Normal priority.
Votes
0

Reported by

Possible assignees